CALL TODAY 651-528-4975
  • Our Services
    • ELECTRICAL REPAIRS
    • Electrical Panel Upgrades and Replacements
    • Knob and Tube rewiring
    • Electric Vehicle Installation
    • Your lighting installation Pros
    • Surge Protectors
    • SMOKE & CO DETECTORS
    • AFCI protection
    • GFCI PROTECTION
    • Home Electrical Safety Inspection
    • HOT TUB WIRING
    • BACK UP GENERATORS
  • Book Online!

Understanding your Smoke and CO detectors.

4/7/2018

Comments

 
According to the the National Fire Prevention Association (NFPA), an average of 2,500 home-fire-related deaths occur each year, and roughly three out of five of them are caused by non-existent or non-functioning smoke alarms. Meanwhile, the U.S. Consumer Product Safety Commission estimates that an average of 170 people die from CO produced by home appliances such as “furnaces, ranges, water heaters and room heaters” annually, and the EPA attributes up to 20,000 lung-cancer deaths per year to radon exposure.

Stats like these make it clear that installing and maintaining smoke, carbon monoxide, and radon detectors is key to your household’s health and safety. Below is the information you need to install proper detection devices and keep them in working order.
Smoke Detectors There are two main types of fire alarms—ionization alarms, which are good at detecting smoky flames, and photoelectric alarms, which can detect smoldering, slow-burning fires.

  • Hardwired alarms should include backup batteries
Placement:
  • Make sure to install smoke alarms on every level of your home, including one inside of each bedroom, and one near the outside of each bedroom
  • For levels that don’t include bedrooms, place smoke alarms in gathering areas and near stairways
  • To avoid false alarms, install smoke alarms at least 10 feet away from cooking appliances
  • Smoke alarms can be placed directly on the ceiling, or on walls, no lower than 12 inches from the ceiling
  • For pitched ceilings, install alarms between 4 and 36 inches from the ceiling’s peak
Maintenance Routine:
  • Test smoke alarms at least once a month by pushing their “test” buttons to see if they beep
  • Replace batteries at least twice a year—including backup batteries for any hardwired alarms
Replacement:
  • Install new smoke alarms at least every 10 years
Carbon Monoxide Detectors Most cases of indoor CO poisoning are caused by improperly vented or malfunctioning furnaces and appliances. CO is colorless and odorless, and even low levels of exposure can cause permanent damage.
  • Hardwired alarms should contain backup batteries, especially since CO-generating heating systems such as fireplaces and generators tend to be in higher use when the power is out
Placement:
  • Install alarms at least 10 to 15 feet away from furnaces, ranges and other combustion appliances to avoid false alarms
  • Avoid placing alarms near fans, vents or windows
  • Gas rises, so consider using alarms that can be installed on or near the ceiling, rather than using plug-in models
  • Install alarms in all bedrooms, as well as in gathering areas
Maintenance Routine:
  • Each month, press and hold each alarm’s test button until it beeps—if it doesn’t, change the batteries
  • For hardwired alarms, replace batteries every six months
Replacement:
  • CO detectors become less sensitive over time and need to be replaced every five years
Picture
Comments

    Author

    Our team wants to make sure you and your family stays safe and comfortable.

    Archives

    April 2022
    January 2022
    May 2021
    March 2021
    February 2021
    January 2021
    October 2019
    February 2019
    December 2018
    July 2018
    May 2018
    April 2018
    November 2017
    October 2017
    September 2017

    Categories

    All

    RSS Feed


    Enter you email address to get the latest updates and information.
    Subscribe to Newsletter

THE LOCAL NEIGHBORHOOD LICENSED ELECTRICIAN
MINNEAPOLIS - SAINT PAUL ELECTRICIAN BASED IN ROSEVILLE

MINNEAPOLIS ELECTRICIANS - SAINT PAUL ELECTRICIANS - RICHFIELD ELECTRICIANS - LAUDERDALE ELECTRICIANS - ST. ANTHONY ELECTRICIANS - COLUMBIA HEIGHTS ELECTRICIANS - ROSEVILLE ELECTRICIANS - FALCON HEIGHTS ELECTRICIANS - ARDEN HILLS ELECTRICIANS - NEW BRIGHTON ELECTRICIANS - LITTLE CANADA ELECTRICIANS - VADNAIS HEIGHTS ELECTRICIANS - SHOREVIEW ELECTRICIANS - NORTH OAKS ELECTRICIANS - MOUNDS VIEW ELECTRICIANS - FRIDLEY ELECTRICIANS - SPRING LAKE PARK ELECTRICIANS - BLAINE ELECTRICIANS - COON RAPIDS ELECTRICIANS - LINO LAKES ELECTRICIANS - WHITE BEAR LAKE ELECTRICIANS  - MAHTOMEDI ELECTRICIANS - DELLWOOD ELECTRICIANS - NORTH ST PAUL ELECTRICIANS - MAPLEWOOD ELECTRICIANS - OAKDALE ELECTRICIANS - LAKE ELMO ELECTRICIANS - STILLWATER ELECTRICIANS - WOODBURY ELECTRICIANS - HUGO ELECTRICIANS
About Us
Blog

Careers
​Financing
Hours
Mon-Fri: 8:00 AM - 5:00 PM
Saturday: 9:00 AM - 4:00 PM
​Jeff@SkylineElectricalMN.com

ROSEVILLE, MN.

WHITE BEAR LAKE, MN

  • Our Services
    • ELECTRICAL REPAIRS
    • Electrical Panel Upgrades and Replacements
    • Knob and Tube rewiring
    • Electric Vehicle Installation
    • Your lighting installation Pros
    • Surge Protectors
    • SMOKE & CO DETECTORS
    • AFCI protection
    • GFCI PROTECTION
    • Home Electrical Safety Inspection
    • HOT TUB WIRING
    • BACK UP GENERATORS
  • Book Online!